IMPROTANT NOTES AND KEY FEATURES
1. Do not insert cartridge if it is wet, or if the sealing compound has hardened.
2. If the tool is operated for long period of time, the motor may overheat.
It is recommended to switch off from time to time.
3. Do not use flammable material, even for cleaning purposes.
4.
When the rack is pulled to its initial position, do not press the switch and stop at
half way. This is to prevent the clutch from incomplete separation, which can
cause the body to hit and damage the mechanics.
5. Automated cut off function while the rack reaches its end.
6. The tool has a drip less function to keep epoxy from dripping. However, this
requires user to push the switch for more than 2 seconds to active this function.
MAINTENANCE
1. Make sure to remove the battery pack before starting maintenance work or
when checking the tool.
2. If epoxy sticks on the rack, it is necessary to pull the rack to its initial position to
get rid of the excess epoxy.
3. Clean the tool:
*Wipe the tool with a soft, dry cloth.
*Do not use a wet cloth or solvents. Since this may discolor the housing.
4. Inspect and clean the tool in regular. Internals.
5. Do not disassembly the tool. Should any repair become necessary, contact the
dealer where you bought the tool or consult an authorized service center.
