3
SG/XG 105(w)/115(w)/125(w)/135(w) Rev. 3
SFP DSL Module Mounting Instructions
Mounting the SFP DSL module
1. Insert the SFP DSL module into
the SFP port of your appliance
2. Connect the SFP DSL module to
the DSL wall plug or splitter by
using a phone cable (RJ11)
3. The SFP DSL module is trying to
connect to the ISP (Status LED starts
blinking -> see LED status table)
4. After the connection to the
ISP has been successfully
established the Status LED will
turn into constant green
Caution! During operation the
module could get very hot.
1.
SFP Port
2.
3/4.
DSL wall plug/splitter
Status LED (Green)
