8. Run belt Adjustment
(1) Deviating the running belt to the left
Start the machine at 2-3KM/h without loading. Use a die nut to screw a 1/4 circle (Fig 1). Let
the machine run without getting on for 1-2 minutes. Use these same instructions, so the belt goes
back into the middle.
(2) Deviating the running belt to the right
Start the machine at 2-3 km/h without loading. Use a die nut to screw a ¼ circle (Fig 2).
Let the machine run without loading for 1-2 minutes. Use these same instructions, so the belt
goes back into the middle.
(3) Running belt logjam
If there is something blocking the running belt, use the die nut to screw a ½ circle, both left and
right until the issue is resolved.
9. DAILY MAINTAINANCE
1. Always unplug the machine before checking or cleaning.
2. Clean belt and dial plate after use, or at least once a week.
3. Check and tighten screws where necessary.
4. Do not hang clothes or other objects on the machine.
-7-
