Soozier 169D5DL04TG01, Инструкция по эксплуатации

Страница: 19 / 24

TIME: 1-180 Mins
DISTANCE: 1.0-30Km
CALORIES :100-3000Kcal
7. Auto Stand-by and sleep Mode
Stop without any operation for 6 minutes , the system closed all the display and enters into the sleep state .Press any key
or remote control to activate.
8.Safety Lock
In any case ,pull out the safety lock can stop the treadmill in an emergency .The window shows "E--7" fault code, treadmill
can't work according to your instruction. After the safety lock reinstalled , the treadmill will enter into stand-by mode and
waiting for your instruction .
DAILY MAINTANCE
Manual Refueling
Running board lubrication- Silicone oil has been provided (White Bottle) .The treadmill is brand-new and has been
pre-factory lubricated. Lubrication is not necessary directly after purchase. Lubrication needs constant maintenance
regular after purchase. The friction between the running board and running belt has a great effect on the treadmills’ life.
So please lubricate your machine regular (every one month).
The steps are as follows:
Step 1. Please unplug power supply for the treadmill and loosen the belt
(belt tension screws located at the end of the treadmill).
Step 2. After loosening the screws, lift up the running belt and clean in-between the running board. Squeeze the small
white bottle of SILICONE oil which was supplied with your purchase and wipe it evenly across the board.
Step 3. Plug power supply and run the treadmill for 1 minute and the oil spread itself evenly , then to use the treadmill .
19