![background image](http://html.mh-extra.com/html/sony/zs-ps50/zs-ps50_operating-instructions_1329716002.webp)
Selecting play mode
You can set the unit to play tracks or files repeatedly
or in random order while a disc/USB device is
stopped.
Press PLAY MODE
repeatedly.
Each time you press the button, the indication
changes as follows:
Normal play (None)
Single repeat ( 1)
All repeat ( )
Selected folder play ( )*
Selected folder repeat play ( , )*
Shuffle play (
)
Program play (PGM)
Program repeat play ( , PGM)
* These functions are available only when playing MP3/
WMA files on an MP3/WMA disc or MP3/WMA/AAC files
on a USB device.
Playing tracks/files repeatedly (Repeat
Play)
You can set the unit to repeatedly play CD-DA tracks
on an audio CD, MP3/WMA files on a CD-R/CD-RW
disc, or MP3/WMA/AAC files on a USB device in
normal and program play modes.
1
Press CD
or USB
to turn on the CD or
USB function.
2
Proceed as follows.
To repeat
Do this
A single track/
file
1 Press PLAY MODE
repeatedly until “ 1” appears.
2 Press
or
to select
a track/file that you want to
repeat.
3 Press
.
All tracks/files
1 Press PLAY MODE
repeatedly until “ ” appears.
2 Press
.
A selected folder
on an MP3/WMA
disc or USB
device
1 Press PLAY MODE
repeatedly until “ ” and “ ”
appear.
2 Select a folder by pressing +
or
.
3 Press
.
Programmed
tracks/files
1 Program tracks/files (see
“Creating your own program
(Program Play)”).
2 Press PLAY MODE
until
“PGM” and “ ” appear on the
display.
3 Press
.
To cancel Repeat Play
Press
to stop playback, and then press PLAY
MODE
repeatedly until “ ” (or “ 1”) disappears
from the display.
Playing tracks/files in random order
(Shuffle Play)
You can set the unit to play CD-DA tracks on an
audio CD, MP3/WMA files on a CD-R/CD-RW disc or
MP3/WMA/AAC files on a USB device in random
order.
1
Press CD
or USB
to turn on the CD or
USB function.
2
Press PLAY MODE
repeatedly until “ ”
appears on the display.
3
Press
to start Shuffle Play.
To cancel Shuffle Play
Press
to stop playback, and then press PLAY
MODE
repeatedly until “ ” disappears from the
display.
Tip
During Shuffle Play, you cannot select the previous track/file
by pressing
.
Other Operations
Creating your own program (Program
Play)
You can arrange the playing order of up to 25
tracks/files on a disc/USB device.
1
Press CD
or USB
to turn on the CD or
USB function.
2
Press PLAY MODE
repeatedly until “PGM”
appears on the display.
3
Press
or
to select a track/file.
When you want to specify a folder that contains
MP3/WMA/AAC files, press + or
first to
select a folder, and then press
or
to
select a file.
4
Press ENTER
.
The track/file is programmed and the program
step number appears.
(Example: audio CD)
Step number
5
Repeat steps 3 and 4 to program additional
tracks/files.
6
Press
to start Program Play.
To play the same program again, press
.
Note that the created program is cleared in the
following cases:
When you open the CD compartment.
When you connect another USB device.
When you turn off the power of the unit in the
CD function.
Note
If you try to program 26 tracks/files or more, “FULL” flashes
on the display.
To display programmed track/file
information
After creating your own program, you can check
information about programmed tracks/files.
Press DISPLAY
repeatedly and the display
changes as follows:
Total number of steps
Last programmed track/
file number
To cancel Program Play
Press
to stop playback, and then press PLAY
MODE
repeatedly until “PGM” disappears from
the display.
To delete all tracks/files in the current
program
Stop playback, and then press
. “noSTEP”
appears and you can create a new program,
following the procedure “Creating your own
program (Program Play).”
Presetting radio stations
You can store radio stations in the unit’s memory.
You can preset up to 30 radio stations, 20 for FM and
10 for AM.
1
Press FM/AM
repeatedly to turn on the
radio function and select the “FM” or “AM”
band.
2
Hold down FM/AM
until “AUTO” flashes on
the display.
3
Press ENTER
to store the station.
The stations are stored in memory from lower
frequencies to higher ones.
If a station cannot be preset
automatically
You need to preset a station with a weak signal
manually.
1
Press FM/AM
repeatedly to select a band.
2
Tune to the desired station.
3
Hold down ENTER
until “FM-xx” or “AM-xx”
flashes on the display.
(Example: FM)
4
Press or
until the preset
number for the station you want flashes on
the display.
5
Press ENTER
to store the station.
If another station is already assigned to the
selected preset number, that station is replaced
by the new one.
Tip
The preset radio stations remain in the unit’s memory even
in the following situations.
The AC power cord is unplugged.
The batteries are removed.
Listening to preset radio stations
1
Press FM/AM
repeatedly to turn on the
radio function and select the “FM” or “AM”
band.
2
Press or
to select a stored
preset number for the desired radio station.
Tip
By repeatedly pressing DISPLAY
while listening to the
radio, the radio information changes between showing the
preset number and the frequency.
The preset number display automatically returns to the
frequency display after 2 seconds have elapsed.
Using the Sleep Timer
You can set the unit to turn off automatically after a
set time has elapsed.
1
Press SLEEP
.
The default setting (“90”) appears and the
“SLEEP” indicator lights up on the display.
2
Press SLEEP
repeatedly to select the
desired setting.
Each time you press the button, the duration (in
minutes) changes on the display, and the
selected setting is confirmed automatically after
about 4 seconds.
Tip
You can check the time left until the unit turns off by
pressing SLEEP
again after setting the sleep timer.
Connecting optional components
You can enjoy the sound from an optional
component, such as a portable digital music player,
through the speakers of this unit.
Be sure to turn off the power of each component
before making any connections.
For details, refer to the instruction manual of the
component to be connected.
1
Connect the AUDIO IN jack
to the line
output jack of the portable digital music
player or other component using an audio
connection cable (not supplied).
2
Turn the connected component on.
3
Press AUDIO IN
and start playing sound on
the connected component.
The sound from the connected component is
output from the speakers.
To connect the unit to a TV or video recorder/
player, use an extension cable (not supplied) with
a stereo-mini jack on one end and two phono
plugs on the other end.
“Err01” appears.
An unsupported USB device is connected and
playback or pause operation is performed.
“
Err02” appears and the unit turns off
automatically.
An abnormal level has been detected in the
electrical current from the
(USB) port
. In this
case, remove the USB device from the
(USB) port
and reconnect the USB device, and then turn
on the unit again. If this problem persists after
turning on the power of the unit, contact your
nearest Sony dealer.
There is no sound.
The USB device may be connected incorrectly.
Turn off the unit and reconnect the USB device.
Then turn on the unit.
There is noise, skipping, or distorted sound.
Turn off the unit and reconnect the USB device.
Then turn on the unit again.
The music data itself contains noise, or the sound
is distorted. Noise may have entered during the
creation of audio files. Try re-creating audio files
and use them to play on this unit.
The USB device cannot be connected to the
(USB) port
.
The connector on the USB device or the USB cable
is being inserted backwards. Insert it to the
(USB) port
in the correct direction.
“
READ” is displayed for an extended time,
or it takes a long time before playback
starts.
The reading process can take a long time in the
following cases:
There are many folders or files on the USB
device.
The file structure is complex.
The memory is almost full.
The internal memory is fragmented.
To avoid the above problems, we recommend that
you adhere to the following guidelines:
Keep the total number of folders on a USB
device to 100 or less.
Keep the total number of files per folder to 100
or less.
Erroneous display
The data stored on the USB device may be
corrupted. Send the music data to the USB device
again.
This unit can display only numbers and letters of
the alphabet. Other characters will not be
displayed correctly.
The USB device is not recognized.
Turn off the unit and reconnect the USB device,
then turn on the unit.
The USB device is not functioning properly. Refer
to the USB device operation manual for details on
how to deal with this problem.
Play does not start.
Turn off the unit and reconnect the USB device.
Play does not start from the first track.
Set the play mode to Normal Play.
MP3/WMA/AAC files cannot be played
back.
The audio files may have inappropriate file
extensions. The file extensions supported by this
unit are as follows:
MP3: file extension “.mp3”
WMA: file extension “.wma”
AAC: file extension “.m4a,” “.3gp” and “.mp4”
The audio files may have been created in formats
other than MP3/WMA/AAC formats.
The USB storage device uses a file system other
than FAT16 or FAT32.*
The files are encrypted or protected by passwords.
* This unit supports FAT16 and FAT32, but some USB storage
media may not support both file systems.
For details, refer to the operation manual of the USB
storage device in question or contact the manufacturer.
Radio
The sound is weak or reception is poor.
Replace all the batteries with new ones.
Move the unit away from nearby TVs.
For FM reception, extend the antenna to its full
length, and reorient it for best FM reception. For
AM reception, reorient the unit itself to find the
best reception.
If you are in a building, listen near a window.
If a mobile phone is placed close to the unit, a
loud noise may be heard from the unit. Keep the
phone away from the unit.
The TV picture is unstable.
If you are listening to an FM program near a TV
with an indoor antenna, move the unit away from
the TV.
After trying the suggested remedies, if the problem
persists, unplug the AC power cord or remove all the
batteries. After all the indications on the display
disappear, plug in the AC power cord again, or
re-insert the batteries. If the problem persists,
consult your nearest Sony dealer.
Precautions
Discs that this unit CAN play
Audio CD (CD-DA*
1
tracks)
CD-R/CD-RW that contains MP3/WMA files and is
finalized*
2
correctly.
*1
CD-DA is the abbreviation for Compact Disc Digital Audio.
It is a recording standard used for audio CDs.
*2
Finalizing is the process to make the CD-R/CD-RW discs
playable on the consumer disc player products, and the
finalizing can be enabled or disabled as optional settings
during disc creation in most recording software.
Discs that this unit CANNOT play
CD-R/CD-RW other than those recorded in audio
CD format or formats conforming to ISO 9660
Level 1/Level 2 or Joliet
CD-R/CD-RW of poor recording quality, CD-R/
CD-RW with scratches or that is dirty, or CD-R/
CD-RW recorded using an incompatible recording
device
CD-R/CD-RW that is unfinalized or finalized
incorrectly
Notes on discs
Clean the CD with a cleaning cloth if
the disc is dirty. Wipe the disc from
the center out. If there are scratches,
dirt or fingerprints on the disc, a
tracking error may occur.
Do not use solvents such as
benzine, thinner, commercially
available cleaners or anti-static
spray intended for vinyl LPs.
Do not expose the CD to direct sunlight or heat
sources such as hot air ducts, or leave it in a car
parked in direct sunlight as there can be a
considerable rise in temperature inside the car.
Do not stick paper or a sticker on the CD, or
scratch the surface of the CD.
After playing, store the CD in its case.
Note on DualDiscs
A DualDisc is a two sided disc product which
mates DVD recorded material on one side with
digital audio material on the other side. However,
since the audio material side does not conform to
the Compact Disc (CD) standard, playback on this
product is not guaranteed.
Music discs encoded with copyright
protection technologies
This product is designed to playback discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
copyright protection technologies are marketed
by some record companies. Please be aware that
among those discs, there are some that do not
conform to the CD standard and may not be
playable by this product.
On safety
As the laser beam used in the CD player section is
harmful to eyes, do not attempt to disassemble
the casing. Refer servicing to qualified personnel
only.
Should any solid object or liquid fall into the unit,
unplug the unit, and have it checked by qualified
personnel before operating it any further.
Discs with non-standard shapes (e.g., heart,
square, star) cannot be played on this unit.
Attempting to do so may damage the unit. Do not
use such discs.
On power sources
For AC operation, use the supplied AC power cord;
do not use any other cord.
Unplug the unit from the wall outlet if it is not to
be used for an extended period of time.
When not using the batteries, remove them to
avoid damage that can be caused by battery
leakage or corrosion.
On placement
Do not leave the unit in a location near heat
sources, in a place subject to direct sunlight,
excessive dust or mechanical shock, or in a car
subject to the direct rays of the sun.
Do not place the unit on an inclined or unstable
surface.
Do not place anything within 10 mm of the rear of
the cabinet. The ventilation openings must be
unobstructed for the unit to operate properly and
prolong the life of its components.
Since a strong magnet is used for the speakers,
keep personal credit cards using magnetic coding
or spring-wound watches away from the unit to
prevent possible damage from the magnet.
On operation
If the unit is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lens inside the CD
player section. Should this occur, the unit will not
operate properly. In this case, remove the CD and
wait about an hour for the moisture to evaporate.
On handling the unit
Do not leave the CD compartment open to avoid
dust and debris contamination.
On cleaning the cabinet
Clean the cabinet, panel and controls using a soft
cloth slightly moistened with a mild detergent
solution. Do not use any type of abrasive pad,
scouring powder, or solvent, such as alcohol or
benzine.
If you have any questions or problems concerning
your unit, consult your nearest Sony dealer.
Specifications
CD player section
System
Compact disc digital audio system
Laser diode properties
Emission duration: Continuous
Laser output: Less than 44.6 μW
(This output is the value measurement at a distance of
200 mm from the objective lens surface on the optical
pick-up block with 7 mm aperture.)
Number of channels
2
Frequency response
20 Hz
20,000 Hz +1/–2 dB
Wow and flutter
Below measurable limit
Radio section
Frequency range
Models for Europe, Australia, New Zealand, Korea, Taiwan,
Kuwait, Saudi Arabia, UAE, Kenya, Mauritius, Nigeria,
Tanzania, and Uganda
FM: 87.5 MHz
108 MHz (50 kHz step)
AM: 531 kHz
1,602 kHz (9 kHz step)
Models for Bolivia, Chile, Paraguay, Peru, and Uruguay
FM: 87.5 MHz
108 MHz (100 kHz step)
87.5 MHz
108 MHz (50 kHz step)
AM: 530 kHz
1,610 kHz (10 kHz step)
531 kHz
1,602 kHz (9 kHz step)
Models for Indonesia, Malaysia, Philippines, Singapore,
Pakistan, Bahrain, Iran, Jordan, Lebanon, Oman, Qatar,
Yemen, Angola, Cameroon, Cote d’Ivoire, Egypt, Ethiopia,
Ghana, Libya, Madagascar, Morocco, Mozambique,
Senegal, Sudan, Zambia, and Zimbabwe
FM: 87.5 MHz
108 MHz (50 kHz step)
87.5 MHz
108 MHz (100 kHz step)
AM: 531 kHz
1,602 kHz (9 kHz step)
530 kHz
1,610 kHz (10 kHz step)
Other models
FM: 87.5 MHz
108 MHz (100 kHz step)
AM: 530 kHz
1,710 kHz (10 kHz step)
Intermediate frequency
FM: 128 kHz
AM: 45 kHz
Antennas
FM: Telescopic antenna
AM: Built-in ferrite bar antenna
Input
AUDIO IN
Stereo mini jack
(USB) port
Type A, maximum current 500 mA, USB 2.0 Full Speed
compatible
Output
(headphones) stereo mini jack
For 16
32
impedance headphones
Supported audio formats
Supported bit rates
MP3 (MPEG 1 Audio Layer-3):
32 kbps
320 kbps, VBR
WMA:
48 kbps
192 kbps, VBR
AAC*:
8 kbps
320 kbps, VBR
* USB function only
Sampling frequencies
MP3 (MPEG 1 Audio Layer-3):
32/44.1/48 kHz
WMA:
32/44.1/48 kHz
AAC*:
32/44.1/48 kHz
* USB function only
General
Speaker
Full range, 8 cm dia., 6
, cone type (2)
Power output
2.0 W + 2.0 W (at 6
, 10% harmonic distortion)
Power requirements
Models for Europe, Australia, New Zealand, Bolivia, Chile,
Paraguay, Peru, and Uruguay
230 V AC, 50 Hz (AC power supply)
9 V DC (6 R14 (size C) batteries)
Models for Taiwan and Latin America (except for Bolivia,
Chile, Paraguay, Peru, and Uruguay)
120 V AC, 60 Hz (AC power supply)
9 V DC (6 R14 (size C) batteries)
Korean model
220 V AC, 60 Hz (AC power supply)
9 V DC (6 R14 (size C) batteries)
Other models
220 V
240 V AC, 50/60 Hz (AC power supply)
9 V DC (6 R14 (size C) batteries)
Power consumption
15 W
0.9 W (during standby mode)
Battery Life*
1,
*
2
Playback of CD
Approx. 9 hours
Playback of USB device
Approx. 11 hours (at 100 mA load)
Approx. 3 hours (at 500 mA load)
FM reception
Approx. 26 hours
*
1
Measured by Sony standards. The actual battery life
may vary depending on the circumstances of the unit
or operating conditions.
*
2
When using Sony alkaline batteries.
Dimensions
Approx. 300 mm × 125 mm × 210.5 mm (W/H/D) (incl.
projecting parts)
Mass
Approx. 2 kg (incl. batteries)
Supplied accessories
AC power cord (1)
Design and specifications are subject to change without
notice.
Troubleshooting
General
The power does not turn on.
Make sure the AC power cord is connected to the
wall outlet securely.
Make sure the connector of AC power cord is
inserted into the AC IN jack securely.
Check if the batteries are inserted correctly,
matching the polarities.
Replace all the batteries with new ones when the
OPR/BATT indicator
dims.
There is no sound.
Make sure the appropriate function is selected for
the music or sound source you want to listen to.
Unplug the headphones when listening through
speakers.
The sound is noisy.
Is someone using a mobile phone or other
equipment emitting radio waves near the unit? If
so, move the unit away from such devices.
A small humming noise is heard from the
radio.
This is not a malfunction. You may hear a small
humming noise from the radio depending on the
status of the power supply.
“notUSE” appears.
You pressed an invalid button.
CD/MP3/WMA player
The CD player does not play even when a
CD is in place.
Place the CD with the label side up.
Clean the CD.
Take out the CD and leave the CD compartment
open for about an hour to dry moisture
condensation.
The CD-R/CD-RW is blank or unfinalized.
There are no playable MP3/WMA files on the disc.
There is a problem with the quality of the CD-R/
CD-RW, recording device or application software.
Replace all the batteries with new ones when the
OPR/BATT indicator
dims.
“noCD” appears when the disc is loaded.
No disc is set in the CD compartment. Set a disc.
The CD may have a reading problem. Replace the
disc.
The CD may be placed upside down. Place the
disc with the label side up.
An unplayable disc (DVD, BD, etc.) is loaded.
Replace the disc.
“00” appears on the display when the disc
is loaded.
No audio files recorded in supported formats, or a
file to be played back has an unsupported file
extension.
“Err C13” appears when the disc is loaded.
The CD may be dirty. Clean the disc.
The CD may have scratches. Replace the disc.
The CD may have a reading problem. Replace the
disc.
A blank disc may be set in the CD compartment.
The sound drops out.
Reduce the volume.
Clean the CD, or replace it if the CD is badly
damaged.
Place the unit in a location free from vibrations.
Clean the lens with a commercially available
blower.
The sound may drop out or noise may be heard
when using a poor quality CD-R/CD-RW or if there
is a problem with the recording device or
application software.
Starting playback takes more time than
usual.
The following discs take a longer time to start
playback.
A disc recorded with a complicated tree
structure.
A disc that has many folders or non-MP3/WMA
files.
USB device
The USB device does not work properly.
If you connect an incompatible USB device, the
following problems may occur.
The USB device is not recognized.
File or folder names are not displayed on this
unit.
Playback is not possible.
The sound skips.
There is noise.
The sound output is distorted.
“Err C13” appears.
An unexpected error occurs in the connected
device.
An unknown device is connected.
License and Trademark Notice
MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
Thomson.
Windows Media is either a registered trademark
or trademark of Microsoft Corporation in the
United States and/or other countries.
This product is protected by certain intellectual
property rights of Microsoft Corporation. Use or
distribution of such technology outside of this
product is prohibited without a license from
Microsoft or an authorized Microsoft subsidiary.
Other trademarks and trade names are those of
their respective owners. In this manual, ™ and
®
marks are not specified.