7
EN
Other Functions
Adjusting the sound
characteristics
1
Select the item you want to adjust by
pressing
(SEL)
repeatedly.
VOL (volume)
n
BAS (bass)
n
TRE
(treble)
n
BAL (balance)
n
FAD (fader)
2
Adjust the selected item by pressing
either
(+)
or
(–)
.
Adjust within three seconds after selecting.
(After three seconds the button will again
serve as the volume control button.)
Muting the sound
Press
(MUTE)
.
The “MUTE” indication flashes.
To restore the previous volume level, press
again.
Radio/Other Functions
Changing the sound and
beep tone
Boosting the bass sound
— D-Bass
You can enjoy clear and powerful bass sound.
The D-bass function boosts the low frequency
signal with a sharper curve than conventional
bass boost.
You can hear the bass line more clearly even if
the vocal sound is the same volume. You can
emphasize and adjust the bass sound easily
with the D-bass control. This effect is similar to
the one you get when you use an optional
subwoofer system.
Adjusting the bass curve
Turn the D-BASS control to adjust the
bass level (1, 2 or 3).
“D-BASS” appears in the display.
To cancel, turn the control to the OFF position.
Note
The bass sound may distort at same volumes. If the bass
sound distorts, adjust the D-BASS control or volume
button.
Muting the beep tone
Press
(6)
while pressing
(SEL)
.
To obtain the beep tone again, press these
buttons again.
Analog D-BASS
Level
Frequency (Hz)
0dB
D-BASS 3
D-BASS 2
D-BASS 1
