14
Setting the clock
automatically
The CT (Clock Time) data from the RDS
transmission sets the clock automatically.
1
During radio reception, press
(SEL)
and
(2)
simultaneously.
2
Press
(2)
repeatedly until “CT-ON”
appears.
The clock is set.
In 2 seconds the normal display
automatically appears.
To cancel the CT function
Select “CT-OFF” in step 2.
Notes
• The CT function may not work even though an
RDS station is being received.
• There might be a difference between the time
set by the CT function and the actual time.
1
Press
(PTY)
during FM reception.
The current programme type name appears
if the station is transmitting the PTY data.
“- - - - -” appears if the received station is
not an RDS station, or if the RDS data has
not been received.
If the TA function is ON, the unit starts
searching for the next station.
2
Press
(PTY)
repeatedly until the desired
programme type appears.
The programme types appear in the order
shown in the above table. Note that you
cannot select “NONE” (Not specified) for
searching.
3
Press either side of
(SEEK)
.
The unit starts searching for a station
broadcasting the selected programme type.
When the unit finds the programme, the
programme type appears again for 5
seconds.
“NO” and the programme type appear
alternately for 5 seconds if the unit cannot
find the programme type. It then returns to
the previously selected station.
