Sony XR-4900, Руководство по эксплуатации

Страница: 13 / 38

13
With Optional Equipment
CD/MD Unit
(XR-C5200 only)
This unit can control a maximum of ten
external CD/MD units in this configuration:
CD unit – maximum of five
MD unit – maximum of five
Any combination up to ten will work.
Playing a CD or MD
1
Press (SOURCE) repeatedly to select CD
or MD.
2
Press (MODE) until the desired unit
appears.
CD/MD playback starts.
When a CD/MD unit is connected, all the
tracks play from the beginning.
Changing the display item
Each time you press
(DSPL)
during CD or MD
playback, the item changes as follows:
$
Elapsed playback time
$
Disc name
*
1
$
Track name
*
2
$
Clock
*
1 If there is no disc name prerecorded on the MD,
“NO NAME” appears in the display.
*
2 If the track name of an MD is not prerecorded,
“NO NAME” appears in the display.
After you select the desired item, the display
will automatically change to the Motion
Display mode after a few seconds.
In the Motion Display mode, all the above
items are scrolled in the display one by one in
order.
Tip
The Motion Display mode can be turned off. (See
“Changing the sound and display settings” on
page 12.)
Automatically scrolling a disc name
— Auto Scroll
If the disc name or track name on an MD
exceeds 8 characters and the Auto Scroll
function is on, it automatically scrolls across
the display as follows:
• The disc name appears when the disc has
changed (if the disc name is selected).
• The track name appears when the track has
changed (if the track name is selected).
If you press (DSPL) to change the display
item, the disc or track name of the MD is
scrolled automatically whether you set the
function on or off.
1
During playback, press (SHIFT) .
2
Press (2) (SET UP) repeatedly until
“A.SCRL” appears.
3
Press (4) ( n ) to select “A.SCRL-ON.”
4
Press (SHIFT) .
To cancel Auto Scroll, select “A.SCRL-OFF” in
step 3 above.
Note
For some MDs with very many characters, the
following cases may happen:
— Some of the characters are not displayed
— Auto Scroll does not work.
Tip
To manually scroll the long name of an MD after
activating the Auto Scroll function, press
(SHIFT) ,
then (1) ( N ) (manual scroll).