Sony XR-3753, Руководство по эксплуатации

Страница: 8 / 100

8
EN
Changing the displayed items
Each time you press
(DSPL)
, the display
changes between the frequency and the clock.
If you cannot tune in a preset
station
Press either side of (SEEK/AMS)
momentarily to search for the station
(automatic tuning).
Scanning stops when a station is received.
Press either side of the button repeatedly
until the desired station is received.
Note
If the automatic tuning stops too frequently, press
(LCL) momentarily to lights up “LCL” on the display
(local seek mode). Only the stations with relatively strong
signals can be tuned in.
Tip
If you know the frequency, press and hold either side of
(SEEK/AMS)
until the desired station is received (manual
tuning).
(SOURCE)
(MODE)
Other Functions
Using the rotary remote
The rotary remote works by pressing buttons
and/or rotating controls.
You can control the optional CD and MD
changer by the rotary remote.
By pressing buttons (the SOURCE
and the MODE buttons)
Every time you press (SOURCE) , the
source changes as follows:
TAPE
n
TUNER
n
CD/MD (XR-C353 only)
Pressing (MODE) changes the operation in the
following ways:
• the tape transport direction.
• the band, FM1
n FM2 n FM3 n MW n LW.
• the CD/MD changer. (XR-C353 only)
Tip
You can turn on this unit by pressing (SOURCE) on the
rotary remote.
By rotating the control (the SEEK/
AMS control)
Rotate the control momentarily and
release it to:
• Locate the beginnings of the tracks on the
tape. Rotate and hold the control, and
release it to fast-wind the tape. To
playback, rotate and hold the control
again, and release it.
• Locate a specific track on a disc. Rotate
and hold the control until you locate the
specific point in a track, then release it to
start playback. (XR-C353 only)
• Tune in the stations automatically.
Rotate and hold the control to tune in the
specific station.