Sony XDS-PD2000 (J), Руководство по установке

Страница: 17 / 28

1-9 (E)
XDS-PD2000/PD1000
Attaching the rack angles (handles)
5. Attach the two rack angles to both sides (left
and right) of the unit with the four screws.
Tightening torque:
138
x
10
-2
N
.
m {14 kgf
.
cm}
Loosely attaching the rail brackets
6. Slide the intermediate rail as shown in the
fi gure, and then loosely attach the rear rail
bracket to the outer rail with the two nuts
with washers and the two screws supplied
with the rail bracket.
7. Slide the ball retainer in the direction of the
arrow, and then loosely attach the front rail
bracket to the outer rail with the two nuts
with washers and the two screws supplied
with the rail bracket.
B4
x
10
B4
x
10
Rack angle
Rack angle
Screw holes
in the handle
B4
x
10
B4
x
10
Rack angle
Rack angle
Screw holes
in the handle
B4
x
12
(Supplied with the rail bracket)
Nuts with washers
(Supplied with the rail bracket)
Rail bracket
Outer rail
Intermediate rail
B4
x
12
(Supplied with the rail bracket)
Nuts with washers
(Supplied with the rail bracket)
Rail bracket
Outer rail
Intermediate rail
B4
x
12
(Supplied with the rail bracket)
Nuts with washers
(Supplied with the rail bracket)
Rail bracket
Outer rail
Intermediate rail
Ball retainer
B4
x
12
(Supplied with the rail bracket)
Nuts with washers
(Supplied with the rail bracket)
Rail bracket
Outer rail
Intermediate rail
Ball retainer