Sony XDCAM PDW-V1 страница 87 Скачать руководство пользователя

Страница: 87 / 109

Chap

r 7

Men

7-4 Maintenance Menu

For details of how to make settings, see “To change
network settings” (page 89).

DUPLEX

Set the communications method.

AUTO, Full (Full Duplex), Half (Half Duplex)

NETWORK CONFIG: items relating to network settings

Item

Setting

SETUP MAINTENANCE: items relating to the setup menu

Item

Setting

EXTENDED MENU

Select whether or not to display the extended menu.

DISABLE

: Do not display.

ENABLE

: Display.

SETUP BANK4

Select the bank to be stored in menu bank 4, or reset menu bank 4.

Cur to 4 (CURRENT TO BANK4)

: Store the current menu settings in menu bank 4.

1 to 4 (BANK1 TO BANK4)

: Store the menu bank 1 settings in menu bank 4.

2 to 4 (BANK2 TO BANK4)

: Store the menu bank 2 settings in menu bank 4.

3 to 4 (BANK3 TO BANK4)

: Store the menu bank 3 settings in menu bank 4.

Reset (RESET BANK4)

: Reset menu bank 4.

SAVE MENU DATA

Select whether to temporarily back up (save) setup menu settings before operations such as
software upgrades.

SET button:

Back up (save) the settings.

MENU button:

Return to next highest menu level without backing up.

LOAD MENU DATA

Select whether to restore (load) setting that were backed up (saved) with the “SAVE MENU
DATA” item.

SET button:

Restore (load) the settings.

MENU button:

Return to the next highest menu level without restoring.

AU BANK RECALL

Select whether to recall settings automatically from a menu bank when the system is
powered on, and if so which menu bank to recall from.

off

: Do not recall settings from a menu bank.

Bank1 (from BANK1)

: Recall settings from menu bank 1.

Bank2 (from BANK2)

: Recall settings from menu bank 2.

Bank3 (from BANK3)

: Recall settings from menu bank 3.

Bank4 (from BANK4)

: Recall settings from menu bank 4.

RESET ALL SETUP

Reset the current menu settings to the factory settings.

SET button:

Reset.

MENU button:

Return to the next highest menu level without resetting.

Notes

• The line mode setting is also cleared. If you execute this item, reset the line mode

(see

page 7)

• Date and time settings are not cleared, but the time zone setting is cleared. After executing

this item, reset the time zone

(see page 27)

Содержание XDCAM PDW-V1














































































































Результаты поиска

Содержание XDCAM PDW-V1

Отзывы:

Похожие инструкции для XDCAM PDW-V1

Бренды по названию

Популярные бренды

Sony XDCAM PDW-V1, Руководство по эксплуатации

Результаты поиска

Содержание XDCAM PDW-V1

Отзывы:

Похожие инструкции для XDCAM PDW-V1

Бренды по названию

Популярные бренды