Sony XDCAM PDW-HD1200, Руководство по установке

Страница: 4 / 22

PDW-HD1200
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
2 (P)
CAUTION
The use of optical instruments with this product
will increase eye hazard.
CAUTION
Use of controls or adjustments or performance
of procedures other than those speci
fi ed herein
may result in hazardous radiation exposure.
Laser Diode Properties
Wavelength :
400 to 410 nm
Emission duration : Continuous
Laser output power : 135 mW (max. of pulse peak.)
65 mW (max. of CW)
Standard : IEC60825-1 (2001)
This Professional Disc Recorder is classi fi ed as a CLASS 1
LASER PRODUCT.
This label is located on the top panel of the drive unit.
GEFAHR
Bei geöffnetem Laufwerk und beschädigter oder
deaktivierter Verriegelung tritt ein unsichtbarer
Laserstrahl aus. Direkter Kontakt mit dem
Laserstrahl ist unbedingt zu vermeiden.
Attention-when the product is installed in Rack:
1. Prevention against overloading of branch circuit
When this product is installed in a rack and is
supplied power from an outlet on the rack, please
make sure that the rack does not overload the supply
circuit.
2. Providing protective earth
When this product is installed in a rack and is
supplied power from an outlet on the rack, please
con
fi rm that the outlet is provided with a suitable
protective earth connection.
3. Internal air ambient temperature of the rack
When this product is installed in a rack, please make
sure that the internal air ambient temperature of the
rack is within the speci
fi ed limit of this product.
4. Prevention against achieving hazardous
condition due to uneven mechanical loading
When this product is installed in a rack, please
make sure that the rack does not achieve hazardous
condition due to uneven mechanical loading.
5. Install the equipment while taking the operating
temperature of the equipment into consideration
For the operating temperature of the equipment, refer
to the speci fi cations of the Operation Manual.
6. When performing the installation, keep the fol-
lowing space away from walls in order to obtain
proper exhaust and radiation of heat.
Top: 2 cm (1 inches) or more
Right, Left: 2 cm (1 inches) or more
Rear:
25 cm (10 inches) or more