Sony XDCAM PDW-850, Руководство по эксплуатации

Страница: 19 / 280

Locations and Functions of Parts and Controls 19
Chapt
er
1
Ov
er
v
ie
w
For details of the counter display, see page 20.
If you press this button when the clip thumbnail
screen is displayed, those frames on which shot
marks are recorded appear in a list (chapter
function). Press the button once more to return to
the normal thumbnail display.
By displaying thumbnails with shot marks
attached in place of index frames, you can check
the contents of clips more easily and more
quickly. This is also useful for cueing up long
clips.
For details of the chapter function, see page 117
p
RESET/RETURN button
Resets the value shown in the time counter
display. According to the settings of the PRESET/
REGEN/CLOCK switch
(see page 22) and the F-
RUN/SET/R-RUN switch (see page 22) , this
button resets the display as follows.
a) Of the timecode bits for every frame recorded on the
disc, those bits which can be used to record useful
information for the user such as scene number,
shooting place, etc.
For details, see “Setting Time Data” (page 69).
This button returns to the previous screen when
pressed during thumbnail display.
For details, see “GUI screen operations”
(page 114).
q
DISPLAY switch
This cycles the data displayed in the counter
display through the sequence COUNTER, TC,
and U-BIT.
COUNTER: Display the elapsed recording/
playback time (hours, minutes, seconds,
frames).
TC: Display timecode.
U-BIT: Display user bit data.
For details, see “Status display on the LCD monitor”
(page 19).
r
BRIGHT (brightness) button
Switches the brightness of the LCD monitor
backlight.
Each press of the button selects the next setting in
the order shown in the following table.
Status display on the LCD monitor
The following display appears on the LCD
monitor display which is set to STATUS with the
DISP SEL/EXPAND button.
a
Resolution
Indicates the resolution of HD output video.
Settings of switches To reset
DISPLAY switch:
COUNTER
Counter to 0:00:00:00
DISPLAY switch:
TC
PRESET/REGEN/
CLOCK switch:
PRESET
F-RUN/SET/R-RUN
switch:
SET
Timecode to 00:00:00:00
DISPLAY switch:
U-BIT
PRESET/REGEN/
CLOCK switch:
PRESET
F-RUN/SET/R-RUN
switch:
SET
User bits
a)
data to 00 00 00
00
Setting LCD monitor backlight
H High (select this to view the LCD
monitor outdoors in the daytime)
M Brightness between H and L
L Low (select this to view the LCD monitor
indoors or outdoors at night)
OFF Off (the display is also off)
Indication Resolution (horizontal × vertical)
1080 1080 lines (1920 × 1080)
720 720 lines (1280 × 720)
W A R N I N G : H U M I D
HD422 50
1080
01 ..
.. ..
23 45 15
5 9 . 9 i 2 4 b i t
H
P B N D F E X T - L K
2 1
H O L D
M I N S E C F R M
D I S C E B
B A T T E F
ST
4 3
d B
O V E R
P E A K
20
10
30
40
0
2 1 3 4 5
6
7
8
9
0
LCD monitor