Sony XDCAM EX PMW-EX30, Руководство по обслуживанию

Страница: 33 / 144

2-5
PMW-EX30
2-9. DPR-297 Board
1. Remove the U case. (Refer to Section 2-1.)
2. Remove the rear panel assembly.
(Refer to Section 2-3.)
3. Disconnect the three harnesses from the connectors
(CN200, CN800 and CN801) on the DPR-297 board.
4. Remove the four screws.
5. Remove the DPR-297 board from the connectors
(CN500 and CN501) on the AVP-11 board.
6. To install, reverse the removal procedure.
2-10. AVP-11 Board
1. Remove the U case. (Refer to Section 2-1.)
2. Remove the rear panel assembly.
(Refer to Section 2-3.)
3. Remove the DPR-297 board. (Refer to Section 2-9.)
4. Remove the screw (PSW3
x
6), then remove the plate
spring.
5. Remove the screw (PTP3
x
6), two screws (P2
x
3)
and plate nut.
6. Remove the four screws (PSW3
x
6) and two supports,
then remove the AVP-11 board in the direction of the
arrow.
7. To install, reverse the removal procedure.
PSW3
x
6
PSW3
x
6
CN801
CN800
CN200
CN500
CN501
DPR-297 board
Harnesses
Harness
AVP-11 board
PSW3
x
6
PSW3
x
6
P2
x
3
PTP3
x
6
AVP-11 board
Plate nut
Plate
spring
Supports