Sony XDCAM EX PMW-EX30, Руководство по обслуживанию

Страница: 23 / 144

1-15
PMW-EX30
1-10. Recommended Periodic Replacement Parts
This section describes the recommended replacement parts and recommended replacement time.
Part name Ref. No. Board Sony part No. Replacement timing
Lithium battery (CR2032 type) BT100 KY-633
!
1-528-174-11 approx. 3 years
1-11. Servicing Software “ServiceNavi-EX”
Servicing software “ServiceNavi-EX” is required for electrical adjustment and self diagnosis.
For how to obtain the “ServiceNavi-EX”, contact your local Sony Sales Of
fi ce/Service Center.
1-12. Note on Service
1-12-1. Requirements on Replacement of Boards or Parts
This section explains the necessary setups required when replacing boards or parts.
1. When any of the following boards is replaced, upgrade the fi rmware version.
All data are written at once when upgrading the fi rmware version. (Refer to Section 1-9.)
Board name Ref. No.
DPR-297 IC202, IC601
KY-633 IC200, IC300, IC400
AVP-11 IC901, IC1202, IC2002
2. Adjusted values are stored in the following boards and parts. The values need to be readjusted when
they are replaced.
Board/part name Ref. No.
DPR-297 *
1
LCD module *
2
IC601/DPR-297 board
*
1: The adjusted values for the LCD module are stored in the DPR-297 board.
*
2: The adjusted values for the LCD module are stored in the LCD module, but the adjusted values need to be copied to the DPR-297
board.
3. The user setting values are stored in IC1313 on the AVP-11 board. The user data must be stored
(Restore) in SxS before replacing the board and it must be read (Recall) after replacing the board.
1-12-2. Note on Replacement of Parts on the Board
Parts labels also cannot be replaced in the DPR-297 board.
If parts become defective, replace the entire mounted board.