Sony XDCAM EX PMW-EX30, Руководство по эксплуатации

Страница: 35 / 111

35 Time Data Handled by This Unit
Cha
p
te
r 2
Pre
par
at
io
ns
Time Data
Handled by This
Unit
Using time data allows you to easily check
time information, ensure high precision
editing, and synchronize multiple devices.
This unit allows setting of timecode value
and user bit data when an HDSDI signal or
the internal test signal is recorded.
When an HDV signal input to the
HDV/
DV connector is recorded, the timecode and
user bit data embedded in the input signal is
recorded as it is.
In recording or E-E mode and during
playback, timecode or user bit data is
displayed on the monitor screen according
to the TC/UB button state.
Displaying the time data
Press the DISPLAY button to display the
time data on the monitor screen.
To switch the time data
displays between timecode
and user bit data
Press the TC/UB button.
The time data type indicator (see page 19)
is switched between TC and UB each time
you press the TC/UB button.
In recording or E-E mode
TCG: Timecode generated by the timecode
generator
UBG: User bit data generated by the
timecode generator
During playback
TCR: Timecode read by the timecode
reader
UBR: User bit data read by the timecode
reader
When an HDV signal input to the HDV/
DV connector is recorded, TCR or UBR is
displayed the time data type indicator on the
monitor screen because the timecode and
user bit data embedded in the input signal
are recorded as they are.
REC LEVEL
CH-1
VIDEO INPUT
PHONES
DISPLAY
MENU
TC/UB
STATUS
F REV PLAY/PAUSE
m
u
SLOT
SELECT
CH-2
iLINK
HD SDI
SG
AUDIO INPUT
PHONE LEVEL
PREV
.
NEXT
>
F FWD
M
SET
A B
THUMBNAIL CANCEL
ANALOG
HD SDI
CH-1/2
HD SDI
CH-3/4
ACCESS
1
STOP
x
REC
z
TOP END
DISPLAY button
LCD display
TC/UB button
Note