12
System Configuration
System Configuration
The following figure shows the
configuration of a system that includes this
adaptor.
Refer to the XDCU-50 Operating Instructions for
details about how to use the adaptor when it is
connected to the XDCU-50.
Do not connect or disconnect the cables
connecting this adaptor and XDCU-50
(CCZ-A and BNC cables) while the system
is powered on. The excessive current
protection function may be activated,
cutting off power to the power circuits of
this adaptor or the XDCU-50.
If the power should be cut off, connect the
cables again in the proper fashion and wait
for a while before starting the system again.
Mounting on the
Camcorder Support
Proceed as follows to mount the adaptor
and the camcorder on the optional VCT-
SP2BP Camera Support, and to connect the
adaptor to the camcorder.
Always power the camcorder off before
mounting it on the VCT-SP2BP.
1
Remove the shoulder pad of the
camcorder.
Refer to the Operating Instructions manual of
the camcorder for information about how to
remove the shoulder pad.
2
Place the adaptor on a flat surface, as
shown in the figure, align the supplied
bracket with the camera adaptor
mounting screw holes (4), and screw it
down securely.
XDCU-50
Camcorder
(mounted on the
optional VCT-SP2BP
camcorder support)
This
adaptor
a) Supplied BNC cable
b) Supplied REMOTE cable
c) Supplied power cable
d) CCZ-A cable
e) BNC cable
Note
Note
Содержание XDCA-53
Страница 19: ......
Страница 20: ...Printed in China ...