Sony XAV-3500, Руководство пользователя

Страница: 40 / 107

Note
While making settings, the connected remote control cannot be used even though some functions have already been registered.
Use the buttons on the unit.
If an error occurs while registering, all the registered information is cleared. Restart registration from the beginning.
This function may not be available on some vehicles. For details on the compatibility of your vehicle, visit the support site.
Tuning Steps (XAV-3500(E)/XAV-3500(LA)/XAV-3500(IN))
Sets the FM/AM tuning step of your country: [50kHz/9kHz], [100kHz/10kHz], [200kHz/10kHz].
Factory Reset
Initializes all the settings to the factory settings.
Firmware Version
Updates and confirms the firmware version.
Open Source Licenses
Displays the software licenses.
Related Topic
Basic Setting Operation
Customer Support Websites
5-010-469-11(1) Copyright 2020 Sony Corporation
Item Detail
Custom
Input mode for the steering wheel remote control (follow the procedures of (register/setup) to
register functions on the connected remote control).
Preset Input mode for the wired remote control excluding the steering wheel remote control.
(register/setup)
The steering button screen appears.
Press and hold the button you want to assign to the steering wheel. The button on the screen
lights up (standby).
Press and hold the button on the steering wheel you want to assign the function to. The button
on the screen will change the color (highlighted or encircled by an orange line).
To register other functions, repeat steps and .
(Available only when [Steering Control] is set to [Custom].)
40