Parts identification
Audio input connector
Connect the following Sony’s
microphones: F112, ECM-678, ECM-
674 or a line output cable from Sony’s
portable mixer DMX-P01.
When connecting a microphone or a
cable to the unit, be sure to turn the
unit off.
SET button
In Transmitting mode, press this
button to change the indicated items in
the lower half of the LCD display.
The SET button is also used to enter
the Setting mode and select the item to
be set.
+ / – buttons
In setting mode, select the
transmission channel, frequency and
RF output power setting using either of
these buttons, or set/reset the +48V
power supply.
POWER switch
Turns the transmitter ON or OFF.
Be sure to connect a microphone or a
cable before turning the power ON.
AF LEVEL control
Adjusts the audio level from the audio
input connector.
3
2
4
5
Caution
Note
6
A AF (audio input) indication
Appears whenever an audio signal
stronger than the reference level is
received.
B RF (antenna output) indication
Appears during signal transmission
from the antenna.
C RF power indication
Shows the RF output power setting.
See “Changing the RF Output Power.”
D BATT (battery) indication
Shows the battery condition.
See “Battery indication” in “Power
Supply” section.
E CH (channel) indication
Shows transmitting channel.
Each time you press the SET button in
Transmitting mode, the channel
indication changes as follows.
Display section
1
7
