Sony WG-C10 Series, Руководство пользователя

Страница: 222 / 313

Help Guide
How to use
Read this first
Product overview
Getting started
How to use "PWS Manager"
(Android)
How to use "PWS Manager"
(iOS)
How to use with a computer
Supplying power
LED status indications
Precautions
Specifications
Compatible device
Trademarks
Troubleshooting
List of Topics
Print
Portable Wireless Server
WG-C10
Setting up the security
1. Connect this unit and a computer via wireless LAN.
2. Enter the following address in the address bar of the web browser to access the
setting screen of this unit.
http://192.168.40.1:8080/
Windows: Internet Explorer, Mac: Safari
The security setting screen is displayed.
3. Select the authentication method (WEP/WPA/WPA2) to be used.
WPA2 is recommended.
If [Disabled] is selected, the security is not set on this unit.
4. Enter a password (alpha-numeric) of your choice. Reenter it for confirmation,
then select [Save].
The password length depends on the authentication method.
WEP: 5 characters or 13 characters
WPA: 8 – 63 characters
WPA2: 8 – 63 characters
Password security is then set on this unit.
5. The wireless LAN connection stops by performing this operation. Perform the
procedure in " Connecting a computer via wireless LAN ", using the password set
in this section, to connect this unit and the computer.
Note
Setting security is extremely important when using devices equipped with the
wireless LAN function. If the security is not set, it is possible for the unit to be
accessed from any compatible device within the communication range. To protect
your data, be sure to set up the security.
If you cannot connect to the above-mentioned address, see whether a proxy has
been set up. If a proxy has been set up, remove the checkmark. If you still cannot
connect, disconnect the LAN cable from the computer.
Go to Page Top
Related Topic
Connecting a computer via wireless LAN
Back Back to Top
214
Search