The earbud will be easier to slide deep into your ear if you pull up on the top of the ear lightly while twisting the headset.
When wearing and removing the headset
In the factory setting, the built-in sensors work when the headset is removed or attached, enabling the headset to pause
or resume music playback or control the touch sensors, indicators, and voice guidance.
When the headset is worn
The indicators of the headset turn off.
You can use the touch sensor to play music, make and receive calls, etc.
You will hear voice guidance corresponding to the operation and status.
When the headset is removed
When only one unit is removed, the headset pauses music playback. When the unit is worn again, the headset
resumes music playback.
When the headset is not worn for about 5 minutes after being removed from the charging case, the headset turns off
automatically to save the battery. The headset will turn on by tapping the touch sensor or wearing the headset.
In order to prevent the headset from reacting incorrectly, you cannot play music, make and receive calls, etc. even if
you tap the touch sensor when not wearing the headset.
Hint
You can also play music, make and receive calls, etc. when wearing only one unit.
By using the “Sony | Headphones Connect” app, you can change the setting of automatically pausing and resuming the music
playback, or automatically turning off the headset.
Related Topic
Using only one unit of the headset
What you can do with “Sony | Headphones Connect” app
4-747-585-11(1) Copyright 2019 Sony Corporation
15
