background image

Sony KV-SW21N63 Group O9 (

GB

)_2-630-056-12 (2)

Select

To

“FM Radio Setup”

*

preset up to nine FM radio stations.

(KV-SW21N63/

You can manually preset each FM radio station that can be

SW21N60 only)

received in your area and then store the radio frequency of
the desired FM radio stations.
(1) Press 

V

 or 

v

 to select the desired FM radio station

position, then press 

.

(2) Press 

V

 or 

v

 to search the FM radio stations.

Searching stops automatically when a station is tuned in.
If the station has a weak signal, press 

B

 or 

b

 to fine tune

the radio frequency manually, then press 

 to store the

FM radio station.

(3) You may edit the FM radio station label. Press 

V

 or 

v

 to

select alphanumeric characters for the label, then
press 

.

(4) Repeat steps (1) through (3) to preset other FM radio

stations.

* The “FM Radio Setup” feature is only available in FM

Radio mode. To enable this feature, access to FM Radio
mode by using WEGA GATE system or pressing the FM
button on the top control panel (see 

F

), then preset your

desired FM radio stations according to the steps mentioned
above.

Changing the “Channel Setup” setting (continued)

01GB05ADJ-SOEMPhi.p65

8/11/05, 4:35 PM

20

Black

Содержание WEGA KV-SW21
























Отзывы: