Sony KV-SW21N63 Group O9 (
GB
)_2-630-056-12 (2)
C
Securing the TV
To prevent the TV from falling, use the supplied screws, clamps and band to
secure the TV. Use only the supplied screws. Use of other screws may damage
the TV.
or
Screw the band to the TV stand and to the
provided hole at the rear of your TV.
(1) Put a cord or chain through the clamps.
(2) Screw one clamp to a wall or pillar and
the other clamp to the provided hole at
the rear of your TV.
20 mm
3.8 mm
screws
clamps band
End
Select
Confirm
b
b
Insert the batteries (supplied) into the remote.
Note
• Do not use old or different types of batteries together.
Connect the antenna cable (not supplied) to
8
(antenna input) at the rear of the TV.
Tips
• Your TV can receive both TV and FM radio signals from the appropriate
connections through the
8
(antenna input) terminal (KV-SW21N63/
SW21N60 only) (see
H
).
• You can also connect your TV to other optional components (see
H
).
Plug in the power cord, then press
!
on the TV to turn it on.
Note
• The
1
(standby) indicator flashes green for a few seconds when
turning on the TV. This does not indicate a malfunction.
Set up the TV by following the instructions of the “Initial
Setup” menu (see
E
).
D
Getting Started
Step 1
Step 2
Step 3
Step 4
01GB02WAR-SOEMPhi.p65
8/11/05, 4:31 PM
4
Black
