M
“Setup” setting
Press WEGA GATE and select “Settings”.
Press
V
or
v
to select the “Setup” icon ( ),
then press
.
“Language”
Change the menu language.
Press
V
or
v
to select either “English” or “
Русский
” (Russian),
then press
.
“Picture Rotation”
Adjust the picture position when it is not aligned with the TV
screen.
Press
B
or
b
to adjust the picture position, then press
.
“Video Label”
Label the connected equipment.
(1) Select “Video Input” and press
. Press
V
or
v
to select the
input you want to label, then press
.
(2) Select “Label” and press
, then press
V
or
v
to select
the label options: “Video 1”/“Video 2”/“DVD”, “VCR”,
“SAT”, “Game” or “Edit”*.
* You may edit the video label to your favorite name. Press
V
or
v
to select alphanumeric characters for the label, then press
.
“Color System”
Select the color system.
Press
V
or
v
to select either “Auto”, “PAL”, “SECAM”,
“NTSC3.58” or “NTSC4.43”, then press
. Normally, set this to
“Auto”.
“Wake Up Timer
Allow your TV to emit beeping sound when TV switches on
Beep”
automatically using wake up timer.
Press
V
or
v
to select “On”, then press
.
To cancel, select “Off”, then press
.
“Factory Settings”
Reset your TV to factory settings.
Press
and press
V
or
v
to select “Yes”. Then press
.
Your TV will go blank for a few seconds, then the “Initial Setup”
menu will appear.
To cancel, select “No”, then press
.
• Color system is not selectable in FM Radio mode.
• To ensure the beeping sound can be heard, you must set an appropriate volume
level on your TV and make sure the TV is not in mute condition.
• To stop the beeping sound, press any buttons on the remote control or front panel.
• If no button is pressed for three minutes, the beeping sound will automatically go
off.
Confirm
End
Setup
Select
Language:
Picture Rotation
Video Label
Color System:
Auto
Factory Settings
English
On
Wake Up Timer Beep:
