– 2 –
SECTION 1
GENERAL
TABLE OF CONTENTS
1.
GENERAL
................................................................... 2
2.
DISASSEMBLY
......................................................... 3
3.
MECHANICAL ADJUSTMENTS
....................... 7
4.
ELECTRICAL ADJUSTMENTS
......................... 7
5.
DIAGRAMS
5-1. Block Diagram ................................................................ 10
5-2. Printed Wiring Board ...................................................... 12
5-3. Schematic Diagram ......................................................... 15
6.
EXPLODED VIEWS
................................................ 21
7.
ELECTRICAL PARTS LIST
............................... 24
This section is extracted from
instruction manual.
SERVICING NOTES
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270 ˚C dur-
ing repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
