Sony VX-1000
Page 2
Photo Recording:
1. Set the STANDBY
switch to PHOTO
STANDBY.
2. Keep pressing the
PHOTO button lightly until
a still picture appears in the
viewfinder. To change the
still picture, release the
PHOTO button. Select
another still picture and
keep pressing the PHOTO
button lightly.
3. Press the PHOTO button deeper. This still image and sound is
recorded for 7 seconds. If the POWER or STANDBY switch is
moved during the photo shot, the operation of these switches is
performed after the 7 second photo shot.
Changing Mode Settings:
1. Slide OPEN and open
the battery cover door.
2. Press MENU to display
the menu in viewfinder
3. Press
or
to select
desired item, then press
EXECUTE.
4. Press
or to select
desired mode, then press
EXECUTE.
To change other modes,
repeat steps 3 and 4.
5. Press MENU to erase menu display.
Supply Power with a Battery:
1. Slide the battery door OPEN button to OPEN the battery
cover.
2. Gently insert the battery pack (making sure the arrow on the
battery is pointing toward the battery compartment) until it is
hooked by the
RELEASE
knob.
3. Close cover.
4. Press the
center button
on the
POWER
switch, set to
CAMERA or
VTR.
To remove the
battery, open
the battery
door and slide
the RELEASE
knob leftward..
Supply Power with AC Adapter:
1. Connect the AC
power cord to an
outlet.
2. Connect the
camcorder and the
AC power adapter
using the supplied
cord.
When not in use,
unplug the AC
adapter from the
outlet..
Cassette Insertion:
1. Connect the
camcorder to a power
source (battery or AC)
2. Slide EJECT button.
The cassette compart-
ment automatically lifts
and opens.
3. Insert a cassette with
the widow facing out..
4. Gently! Press
the outside of the
compartment
cover to close.
5. Wait for the
compartment to
automatically
retract!
6. After the cassette
compartment cover has
retracted, press the upper
cassette compartment flap
until it clicks.
Camera Recording:
1. Remove the hood cap,
and attach it to the grip
strap.
2. While pressing the
center button on the
POWER switch, set it to
CAMERA.
3. Turn STANDBY
switch upward.
4. Press START/STOP
button. The camcorder
starts recording. The
“REC” indicator appears
in the viewfinder, and red lamp indicator lights up in the front and
the back of the camcorder.
5. Press STOP/START to stop recording. STBY appears in
viewfinder and the red lamp goes off.
➜
➜
