Sony VPL-VW760ES, Руководство по эксплуатации

Страница: 12 / 54

12
1
Turn on the 3D glasses, and register them on the unit.
For details on how to register the 3D glasses, refer to
the operating instructions supplied with the 3D
glasses.
2
Put on the 3D glasses.
3
Turn toward the screen.
Precautions for use
Misoperation may occur if:
• The viewing position is too far from the projector
• There are other communication devices, such as a
wireless LAN (IEEE802.11 b/g/n) or a microwave with
a bandwidth of 2.4 GHz, near the unit
3D glasses communication range
The following figure indicates the communication range of
the 3D glasses. If you try to watch 3D video images from
a distance greater than the communication range or install
the unit outside the communication range, the 3D glasses
may not be able to display the images properly. Also, the
distance varies depending on the environment of the room
and installation environment of the unit.
Top or side view
Using the Picture
Position
You can store up to five combinations of lens settings
(focus, picture size, picture position), aspect ratio, and
blanking. These settings can be recalled.
In the factory preset setting, the Picture Position is not
stored.
1
Press POSITION.
The Picture Position selecting palette is displayed.
2
Press POSITION repeatedly, or press
M
/
m
/ to
select the position.
The settings of the position selected is recalled.
Store or delete lens settings, aspect ratio, and blanking
in the “Picture Position” of the Screen
menu
(page 23).
The position where the lens settings, aspect ratio, and
blanking are not stored is displayed as “---.”
Using the 3D Glasses
Projector
10 m 10 m
10 m
10 m