36
Installation Menu
When “Zone” is selected: Select the position to adjust with
<
/
,
buttons for the horizontal position (H position) and
M
/
m
buttons for
the vertical position (V position), then press
.
Set the amount to adjust with
<
/
,
buttons for the horizontal
direction (H direction) and with
M
/
m
buttons for the vertical
direction (V direction). You can select the position to adjust again by
pressing .
Reset:
Returns to the factory settings.
Preset:
The optimized data has been preset.
Depending on the adjustments made above, colors may become uneven
or the resolution may change.
Network Setting
Perform internet protocol settings.
IPv4 Setting
IP Address Setup
: Selects the IP address setting method.
Auto (DHCP):
The IP address is assigned automatically from the
DHCP server such as a router.
Manual:
Specifies the IP address manually.
When “Manual” is selected for “IP Address Setup,” select the item
with the
<
/
,
buttons and input the value with the
M
/
m
buttons.
When all items are entered, select “Apply,” and then press the
button. The entered settings will be registered.
IP Address
: Sets the unit’s IP address.
Subnet Mask
: Sets the unit’s subnet mask.
Default Gateway
: Sets the unit’s default gateway.
MAC Address
: Displays the unit’s MAC address. This cannot be
changed.
Apply
: Enables the IP address that is set manually.
IPv6 Information
Displays the IPv6 information.
When you set the IPv6 IP address, set it on a Web browser (page 38).
Setting items
Description
Note
