65
ES
Otro
s
Solución de problemas
Si el proyector parece no funcionar correctamente, intente diagnosticar y corregir el
problema utilizando las siguientes instrucciones. Si el problema no se soluciona, consulte
con personal especializado de Sony.
Alimentación
Imagen
Síntoma
Causa y solución
La alimentación no se
activa.
c
Es posible que la alimentación no se active si la apaga con el
interruptor
I
/
1
(encendido/espera) y la vuelve a encender en un
corto periodo de tiempo.
Después de 1 minuto, aproximadamente, encienda la
alimentación.
c
Cierre firmemente la cubierta de la lámpara y, a continuación,
apriete los tornillos. (
c
Cierre firmemente el soporte del filtro. (
c
Compruebe los indicadores de advertencia. (
La unidad se apaga de
repente.
c
Compruebe que “Ahorro de energía” en el menú Configuración
está ajustado en “Espera”. (
c
Ajuste “Ahorro de energía” en “No”.
Síntoma
Causa y solución
Sin imagen.
c
Compruebe que ha realizado las conexiones adecuadas.
(
c
Seleccione correctamente la fuente de entrada mediante el botón
INPUT. (
c
Establezca la señal del ordenador que se enviará desde un
monitor externo.
c
Ajuste el ordenador para que envíe la señal solamente a un
monitor externo.
La imagen tiene sombras.
c
Las imágenes de vídeo se están procesando en 3D. Vea las
imágenes de vídeo en 3D con las gafas 3D o ajuste la opción
“Sel. pantalla 2D-3D” en “2D” (
El área brillante de la
imagen puede hacerse
menos clara, y los textos
pueden difuminarse.
(Cuando se introduce una
señal de vídeo HDMI)
c
Cambie el nivel de salida RGB del equipo conectado o cambie
la opción Rango din. HDMI de la unidad (
Es posible que los textos se
difuminen cuando se
conecte un ordenador.
(Cuando se introduce una
señal de ordenador)
c
Este síntoma puede producirse cuando se introduce una señal
diferente de la del estándar HDMI. Ajuste “Nitidez” en el menú
Imagen
, o bien ajuste “Rango din. HDMI” en “Limitado”
en el menú Función
. (
1
La imagen es demasiado
oscura.
c
Ajuste correctamente “Contraste” o “Brillo” en el menú Imagen
La imagen no es nítida.
c
Ajuste el foco. (
c
Se ha acumulado condensación en el objetivo. Deje el proyector
encendido durante unas 2 horas.