Sony VPL-GTZ270 Скачать руководство пользователя страница 32

Страница: 32 / 54

Installation Menu

The Installation menu is used for changing the installation settings.

Setting items

Description

Image Flip

Flips the picture on the screen horizontally and/or vertically.

HV:

Flips the picture horizontally and vertically.

Flips the picture horizontally.

Flips the picture vertically.

Off:

The picture does not flip.

Use this item for installation for the rear projection or ceiling installation.

Lens Control

Avoids any operation of the lens such as “Lens Focus,” “Lens Zoom,” and “Lens Shift,” by mistake.

On:

Enables adjustment of the lens.

Off:

Prevents any adjustment of the lens.

Trigger Select

Switches the output function of the TRIGGER 1/TRIGGER 2 connector.

Off:

Turns off the TRIGGER connector function.

Power:

Outputs 12 V signals from the TRIGGER 1/TRIGGER 2 connectors when the unit is on. The

TRIGGER 1/TRIGGER 2 connectors do not output any signals when the unit is in standby.

2.35:1 Zoom:

Works with the “Aspect” setting’s “2.35:1 Zoom” (page 25) and outputs a 12 V signal

from the TRIGGER 1 or TRIGGER 2 connector.

3D:

Outputs a 12 V signal from the TRIGGER 1 or TRIGGER 2 connector when the 3D signal is input

or when working with “2D-3D Display Sel.” of “3D” “3D Settings” (page 29).

IR Receiver

Selects the remote control detectors (IR Receiver) on the front and rear of the unit.

Front & Rear:

Activates both the front and rear detectors.

Front:

Activates the front detector only.

Rear:

Activates the rear detector only.

ID Mode

All/1/2/3/4:

Assigns an ID number to the projector. When set to “All,” you can control the projector with

the remote control independently of the assigned ID Mode. Refer also to “ID MODE switch” of the
remote control (page 5).

Содержание VPL-GTZ270























































Результаты поиска

Содержание VPL-GTZ270

Отзывы:

Похожие инструкции для VPL-GTZ270

Бренды по названию

Популярные бренды

Sony VPL-GTZ270, Руководство по эксплуатации

Результаты поиска

Содержание VPL-GTZ270

Отзывы:

Похожие инструкции для VPL-GTZ270

Бренды по названию

Популярные бренды