Sony VPL-GTZ270 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 54

background image

29

Function Menu

The Function menu is used for changing the settings of the various functions of the unit.

Setting items

Description

3D Settings

You can change the settings of the 3D function.

2D-3D Display Sel.

For Switching the video images to “2D” or “3D.”

Auto:

Displays 3D video images when HDMI signals with 3D information* are input. Displays 2D

video images when other signals are input.

3D:

Displays 3D video images according to the 3D system selected in “3D Format.” However, when

HDMI signals with 3D information are input to the unit, displays 3D video images according to the 3D
system of those HDMI signals.
* The 3D information is additional information to differentiate 3D. Some HDMI signals have additional

information to differentiate 3D and some HDMI signals have none.

3D Format:

Set the 3D system when the input HDMI signals do not include 3D information.

Simulated 3D:

Converts 2D video images to 3D video images. The setting can be made only for input

the HD signals.
The simulated 3D feature may have limited effect, depending on the video source.
There are differences in perception of 3D video images among individuals.

Side-by-Side:

Select this to display 3D images as two similar images, side-by-side.

Over-Under:

Select this to display 3D images as two similar images, one above the other.

Tips

• “2D-3D Display Sel.” cannot be set to “3D” for some video sources. For available 3D signals, see

“Compatible 3D Signals” (page 45).

• The simulated 3D feature may have limited effect, depending on the projection image size (100 to 120

inches recommended) and the video source.

• The menu display has a ghost while a 3D video image is displayed and is best viewed with the 3D

glasses.

3D Brightness

For adjusting the brightness of the picture when watching 3D video images.
You can select the brightness from “High” or “Standard.”

3D Depth Adjust

For adjusting the depth of the 3D video images on the projection surface. The setting can be made only
when a 3D Format other than “Simulated 3D” is selected.

We recommend that “3D Depth Adjust” be set to “0.” The 3D video images may be difficult to perceive,
depending on the setting of “3D Depth Adjust.”

Simulated 3D Effect

For adjusting the 3D effect when 2D content is converted to 3D video images. You can select the effect
from among “High,” “Middle,” and “Low.”

Tip

There are differences in perception of 3D video images converted by the simulated 3D function among
individuals.

Depth

Normal

Front

Depth

«
...
27
28
29
30
31
...
»

Содержание VPL-GTZ270























































Отзывы:

Нет отзывов

Похожие инструкции для VPL-GTZ270

Бренд: Patton electronics Страницы: 3

Бренд: Panamax Страницы: 4

ClickShare CSC-1

Бренд: Barco Страницы: 3

senIor electrol

Бренд: Da-Lite Страницы: 8

Бренд: InFocus Страницы: 5

Бренд: Black Box Страницы: 1

Бренд: BenQ Страницы: 2

Бренд: M-system Страницы: 4

Бренд: ViewSonic Страницы: 144

LED Profile C34

Бренд: Light Sky Страницы: 28

Бренд: IN HOUSE LED Страницы: 16

Бренд: Premier Страницы: 2

GOBO PROJECTOR LED

Бренд: American DJ Страницы: 1

Бренд: Wyrestorm Страницы: 14

Бренд: Acer Страницы: 51

Бренд: Acer Страницы: 66

Бренд: Acer Страницы: 74

Бренд: Acer Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды