Sony VPL-FHZ70 страница 69 Скачать руководство пользователя

Страница: 69 / 70

About Trademarks

• Adobe Acrobat is a trademark of Adobe

Systems Incorporated.

• Kensington is a registered trademark of

Kensington Technology Group.

• Internet Explorer is registered trademarks

of Microsoft Corporation in the United
States and/or other countries.

• Safari is a registered trademark of Apple

Corporation in the United States and/or
other countries.

• PJLink is a registered trademark of Japan

Business Machine and Information
System Industries Association.

• AMX is a trademark of AMX Corporation.
• The terms HDMI and HDMI High-

Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered
trademarks of HDMI Licensing
Administrator, Inc. in the United States
and other countries.

• Crestron RoomView is a trademark of

Crestron Corporation.

• HDBaseT™ and the HDBaseT Alliance

logo are trademarks of the HDBaseT
Alliance.

• Extron and XTP Systems are trademarks

of RGB Systems, Inc.

• All other trademarks and registered

trademarks are trademarks or registered
trademarks of their respective holders. In
this manual,

™

and

marks are not

specified.

Содержание VPL-FHZ70







































































Результаты поиска

Содержание VPL-FHZ70

Отзывы:

Похожие инструкции для VPL-FHZ70

Бренды по названию

Популярные бренды

Sony VPL-FHZ70, Руководство по эксплуатации

Результаты поиска

Содержание VPL-FHZ70

Отзывы:

Похожие инструкции для VPL-FHZ70

Бренды по названию

Популярные бренды