48
Start PJ Control API Service:
Set PJ
Control API to enabled or disabled.
-Requires Authentication:
Set the
authentication for PJ Control API to
enabled or disabled.
-PSK(Pre-Shared Key):
Input the PSK
(Pre-Shared Key) for authentication.
Only 8 to 63 alphanumeric characters
can be input.
7
Click on [Service] to display the
Service page.
The system service function is set.
Start DDDP Service:
Set DDDP to
enabled or disabled. For details, refer
to the DDDP specifications from
AMX Corporation.
Crestron Control:
For details, refer to
the product catalogues, etc., from
Crestron Corporation.
-IP Address:
Input the Crestron system
server.
-IP ID(HEX):
Input the IP ID(HEX) for
the CIP protocol.
-Port No.:
Input the port number for the
CIP protocol server.
Resetting the network settings
Reset the network settings to their factory
defaults.
Reset:
Reset all Web browser settings to
their factory defaults.
Service button
Reset button
Reset
Содержание VPL-FHZ70
Страница 33: ...33 identity has been confirmed we will provide you with the password ...
Страница 70: ...Sony Corporation ...
