Sony VPL-F430HZ, Руководство по обслуживанию

Страница: 66 / 116

2-2 (E)
VPL-FHZ65
2-2-3. C Board
When replacing the C board, perform the following procedure.
1. Save the Main data and NVM (All) data before replacement of the C board using Quick Access3.
(Refer to Sections 2-6-2 and 2-6-4.)
2. Replace the C board. (Refer to Section 1-6-5.)
3. Write the data saved in step 1 to replaced C board. (Refer to Sections 2-6-6 and 2-6-8.)
4. Perform the V COM adjustment. (Refer to Section 2-3-2.)
5. Perform the laser luminance and luminance sensor adjustment. (Refer to Section 2-4.)
6. Check the white balance state, and perform the adjustment as required. (Refer to Section 2-3-3.)
2-2-4. Laser Source Unit
When replacing the laser source unit, perform the following procedure.
1. Write the data released for service using Quick Access3. (Refer to Section 2-6-8.)
2. Perform the laser luminance and luminance sensor adjustment. (Refer to Section 2-4.)
2-2-5. PS Assembly and In-polarizer (B) Assembly
When replacing the PS assembly and in-polarizer (B) assembly, perform the following procedure.
1. Perform the laser luminance and luminance sensor adjustment. (Refer to Section 2-4.)