1-4 (E)
VPL-FHZ65
1-6. Disassembly
.
The laser diode is used as a light source of this unit.
Never allow the light source to emit light with the cabinet removed.
Otherwise, it may cause damage to eyes or skin.
.
Do not remove the lens when the set is lighting.
Otherwise, it may cause damage to eyes or skin.
.
Do not release the protection circuit with the cabinet removed.
Otherwise, the light source may suddenly start emitting light, causing damage to eyes or skin.
.
In order to avoid inappropriate use of the laser diode, do not disassemble the laser source unit.
.
When performing the adjustment that requires turning the power of this unit off and on, be sure to
perform the operation with the top cover assembly attached.
.
In this section, remove parts in the order of numbers shown in the figure.
.
This unit supports the optional lens. For the lens that can be attached, refer to Section 3.
.
When removing the lens, press the
[SHIFT]
button of this unit or the
[LENS|SHIFT]
button of the
remote control, then press the
[RESET]
button of the remote control to move the lens shift unit to the
center position.
Содержание VPL-F430HZ
