Sony VPH-D50Q, Руководство по установке, Страница: 31 / 338

Connections
31
(EN)
Connections
TRIGGER
PLUG IN POWER
CONTROL S
IN OUT
REMOTE
RS-422A
INDEX
ABL LINK
IN OUT
VIDEO S VIDEO
Y IN C IN
INPUT A
R G B SYNC/HD VD
IN OUT
MODE REMOTE1
R-Y/P
R
Y B-Y/P
B
OUT OUT
IN IN
TRIGGER
PLUG IN POWER
CONTROL S
IN OUT
REMOTE
RS-422A
INDEX
ABL LINK
IN OUT
VIDEO
S VIDEO
Y IN C IN
INPUT A
R G B SYNC/HD VD
IN OUT
MODE REMOTE1
R-Y/P
R
Y B-Y/P
B
OUT OUT IN IN
When connecting multiple projectors, you can project the multi-screen
picture.
When the projectors are connected using the SIC-M or CCQ-BRS cable
Connecting Multiple Projectors
Notes
• Insert the female and male plugs of the SIC-M or CCQ-BRS cable correctly.
• You can extend the SIC-M or CCQ-BRS cable between the projector and the
switcher up to 50 m.
• The video signal input to the signal interface board installed to the INPUT B
section should not exceed 70 MHz.
Setting up
• Set the SINGLE/SECOND/OTHER select switch on the switcher to
SINGLE.
• To control the projectors using the index number, set the sequential
number from 01 to 08 on each projector using the INDEX NO. switches
on the rear panel.
Rear
Second projector
First projector
Video
equipment PC-1271/1271M
Switcher
IFB-40 Signal Interface Board
IFB-40 Signal Interface Board
SIC-M or CCQ-BRS
connecting cable
to IN on another
projector
SIC-M or CCQ-BRS
connecting cable
to REMOTE 1 OUT
IN
OUT
OUT
IN