background image

720P (60Hz) 
1035I (60 Hz) 
1080I (50 and 60 Hz) 
1080P (24 PsF) 
VGA Computer Graphics (Modes 1, 2 and 3, 60 - 85 Hz) 
VESA 800x600 Computer Graphics (56 - 85 Hz) 
VESA 1024 x 768 Computer Graphics (43 – 85 Hz) 
VESA 1152 x 864 Computer Graphics (70 – 75 Hz) 
SUN 1152 x 900 Computer Graphics (65 – 76 Hz) 
VESA 1280 x 1024 Computer Graphics (43 – 85 Hz) 
VESA 1600 x 1200 Computer Graphics (60 - 75 Hz) 
Mac 13” Computer Graphics 
Mac 16” Computer Graphics 
Mac 21” Computer Graphics 
 
This device shall accept multi-scanning sources, with scan frequencies ranging 
from 15 to 100 kHz Horizontally, and 40 to 120 Hz Vertically. 
 
This device shall employ the use of a high performance interpolation circuit, 
which regenerates a high-resolution sampling of the original signal by referring to 
memorized waveform patterns to enhance image performance. This device shall 
also employ the use of a 3-dimensional comb filter and 3-line filter for maximum 
chrominance and luminance separation and to minimize dot interference and 
cross color when viewing NTSC video sources. 
 
This device shall have the ability to store and recall multiple memory presets for 
various video and computer configurations. 
 

4.0 

User Interface / Controllability Information 

 

Control of this device shall be accomplished through one of the following 
methods: 
 
Backlit, projector control panel 
Wired / Wireless backlit projector remote control 
Serial control jack for control by external control systems 
Advanced serial control jack for control by external control systems 
Advanced serial control jack for control by external signal switchers 
 
All of these control methods shall be standard to the device, or available at an 
additional charge if considered an optional accessory. 
 
The projector control panel shall be recessed into the cabinet, and shall employ 
the use of a backlight that activates when any button is pressed. The backlight 
shall have a timeout function. The control panel shall activate multi-language on-
screen menus, which navigate the operator through setup and configuration of 

Содержание VPD-LE100








Отзывы: