1.0
General Information
The purpose of this information is to provide the specification for a product whose
primary purpose is the reproduction of video and / or computer graphics
information for one or more viewers.
This reproduction of this information is to be accomplished via a projection DLP
display. This document provides the minimum specifications for this device.
The performance comparison of displays is not only technical in nature, but is
also subjective to the user, when viewed in the final display environment. It is
recommended that devices meeting the requirements of this specification be
compared in the user’s application and environment, if possible.
2.0
Description
This product shall be classified as a large screen projection DLP display, or
graphics projector. This device shall be directly compatible with both video and
computer graphics sources, without the use of external devices to provide this
compatibility.
This device shall employ the use of three 1.1-inch Texas Instruments DMD chips
for optimum display of high-resolution sources.
This device shall employ a highly mobile design that can easily be ceiling
mounted using an optional bracket from the device manufacturer or from third
parties or desktop configured for projection booth use. Handles shall be an
integral part of the device for simplified transport. Stacking of multiple devices
shall be possible with the use of an optional stacker from a third party
manufacturer.
3.0
Source Compatibility / Suitability for Application
This device shall be directly compatible with the following sources:
NTSC Video (Composite and Y/C)
PAL Video (Composite and Y/C)
PAL-M Video (Composite and Y/C)
SECAM Video (Composite)
Modified NTSC 4.43 (Composite)
Component Video (50 and 60 Hz)
RGB Video (50 and 60 Hz)
FILM / 60P
480P (60Hz)
575P (50Hz)
