VPCEE Series Optical Disk Drive
Replacement Instructions
P/N 989201979
Rev. B
2/3
Step 4.
Using the enclosed magnetic
screwdriver, remove the screw securing
the ODD Bay.
Put aside the ODD Bay
screw to re-secure the ODD Bay later
in the procedure.
Step 5.
Insert your fingers in the space
between the ODD and the unit
.
Gently
pull towards the Left to remove the
ODD.
Step 6.
Carefully remove the ODD
assembly from the unit.
ODD Disassembly (Steps 7-9)
Step 7.
Identify the four (4) side screws
that secure the ODD brackets to the
ODD.
Step 8.
Remove the screws & bracket.
Put the ODD Bracket and screws
aside for transfer to the New ODD.
Step 9.
Arrange the bracket & screws
as shown above. Set the Old ODD
aside.
Step 11.
Align the tabs on the Bezel
with the tab holes located on the
ODD. Carefully press the Bezel into
place.
ODD Assembly (Steps 10-13)
Step 10.
Take the new ODD and Bezel
provided in the CRU kit and prepare for
assembly.
NOTE:
Identify the tabs on the Bezel
and tab holes located on the ODD.
