Sony Vaio VGN-FE31B Скачать руководство пользователя страница 152

Страница: 152 / 218

152

Upgrading Your VAIO Computer

VGN-AR series models

To change or add a memory module

Shut down the computer and disconnect all peripheral devices.

Unplug the computer and remove the battery pack.

Wait until the computer cools down.

Unscrew the screw (indicated by the arrow below) on the bottom of the computer and remove the memory module
compartment cover.

Touch a metal object (such as the connector panel on the back of the computer) to discharge static electricity.

Remove the memory module:

❑

Pull the latches in the direction of the arrows (1).
The memory module is released.

❑

Make sure that the memory module tilts up and then pull it out in the direction of the arrow (2).

Содержание Vaio VGN-FE31B



























































































































































































































Результаты поиска

Содержание Vaio VGN-FE31B

Отзывы:

Sony Vaio VGN-FE31B, Руководство пользователя, Страница: 152 / 218

Результаты поиска

Содержание Vaio VGN-FE31B

Отзывы: