Sony VAIO PCWA-DE30, Быстрый старт

Страница: 14 / 59

13
3 Enter the Network Name (SSID) of your Access Point.
If the Access Point setup is complete: use the same Network name (SSID)
as the one set for the Access Point.
If the Access Point setup is not complete: refer to the documentation
provided with your Access Point and enter the default Network Name
(SSID).
The Network name (SSID) is an identifier used to identify the wireless
network. It is required for communication with the Access Point.
To search for active Access Points in the vicinity, click the
Scan button.
4 Configure the Encryption (WEP) , Key Length , and WEP key settings.
If the Access Point setup is complete: use the same values as the one set
for the Access Point.
If the Access Point setup is not complete: refer to the documentation of
the Access Point and enter the default values.
Encryption of wireless communications data (as selected by Encryption
(WEP) ). The length of the string must match the encryption key length
setting.
For verification, the string must be entered once more in the
WEP Key
(Confirmation) field.
Clicking Help or ? displays Help.
5 When setup is complete, click Next .
The Setup confirmation page appears.
6 Make sure that the settings are as desired, and click Execute Setup .
The setup completion page appears.
When you click Execute Setup, the Wireless LAN Converter restarts.
If the status indicator on the front panel of the Wireless Unit flashes
slowly, communication with the Access Point is established.
If the read-in condition continues after you click
Execute Setup , check
the status indicator on the front panel of the Wireless Unit. If the indicator
flashes slowly white, setup is complete and wireless communication is
possible.
If the status indicator flashes red, communication with the Access Point
cannot be established. Refer to the Troubleshooting Guide or Help.
7 Close the Web browser.
Encryption (WEP) Select whether to use data encryption or not.
Key Length Select the Encryption (WEP) key length. The number of characters for
the key string depends on this setting.
WEP Key Enter a character string to be used as the Encryption (WEP) key. The
length of the string must match the encryption ley length setting.
For verification, the string must be entered once more in the
WEP
Key (Confirmation) field.