Removing the Side Panel
To remove the side panel (PCV-RZ series model)
1.
Shut down your computer and turn off all peripheral devices, such as your printer.
2.
Unplug your computer and disconnect any peripheral devices.
3.
Locate the two tabs on the back edge of the right side panel.
4.
Press up on these tabs and slide the side panel towards you.
5.
Lift up the side panel and set aside.
Rem ov ing the side panel
(PCV- RZ series m odel equipped with Giga Pocket)
To remove the side panel (PCV-RX series model)
1.
Shut down your computer and turn off all peripheral devices, such as your printer.
2.
Unplug your computer and any peripheral devices.
3.
Locate the tab on the upper right side of the rear panel, and pull it back until the side panel releases.
4.
Lift the side panel away from the unit and set aside.
Rem ov ing the side panel (PCV- RX series m odel)
If you remove the side panel immediately after you shut down your computer, the components may be
too hot to touch. Wait until the internal parts of the system unit cool down before you attempt to remove the side
Page 50
Содержание VAIO PCV-RX891
Страница 28: ...Page 28 ...
Страница 32: ...5 Follow the on screen instructions to finish setting up your dial up connection Page 32 ...
Страница 51: ...panel Page 51 ...