29
2. PCG-V505 Series Disassembly
FIGURE 2-25 - LCD PANEL REMOVAL (step1)
REMOVE 4 SCREW COVERS AND
SCREWS (B15)
LOOSEN BEZEL BY GENTLY LIFTING
THE INSIDE EDGE AND MOVING
OUTWARD TO DISENGAGE LOCKS ON
OUTER EDEGES. START WITH TOP,
THEN SIDES AND FINISH WITH BOTTOM
Replacing the LCD Panel
If the LCD panel requires replacement, it must be removed from its housing. The following steps illustrate this
procedure.
Step 1
: Remove the rubber screw covers at each corner as shown in Figure 2-25. Remove the 4 screws (B15).
Unsnap the bezel retainers by lifting up the inside edges of the bezel and pushing outward slightly. Start with the
top, followed by the sides, and ending with the bottom.