Sony VAIO PCG-GRV600 Series, Быстрый старт

Страница: 60 / 68

VAIO® Computer Quick Start
60
4 Press the Right Arrow key to select the Exit tab, and then press the
Down Arrow key to select Get Default Values . The message Load
default values for all SETUP items appears.
5 Press Enter . The Setup Confirmation window appears.
6 Select Yes , and press Enter .
7 Select Exit (Save Changes) , and press Enter . The Setup Confirmation
window appears again.
8 Select Yes , and press Enter . The computer restarts.
What do I do if the message, “Operating system not found” appears when my
computer starts, and why won’t Windows start?
❑
Make sure the computer does not have a “non-bootable” floppy disk in the
floppy disk drive (if applicable).
❑
If a non-bootable floppy disk is in the drive:
1 Remove the floppy disk.
2 Restart the computer and confirm that the Microsoft® Windows®
operating system starts properly.
❑
If Windows still does not start, follow these steps to initialize the BIOS:
1 If there is a disk in the floppy disk drive, then remove it.
2 Turn off the computer.
3 Remove any peripheral devices connected to the computer.
4 Restart the computer.
5 Press F2 when the Sony logo appears. The BIOS Setup window
appears.
6 Press the Right Arrow key to select the Exit menu.
7 Press the Down Arrow key to select Get Default Values . The
message Load default values for all SETUP items appears.
8 Press Enter . The Setup Confirmation window appears.
✍
If this occurs on a regular basis, contact Sony Computing Support
(http://www.sony.com/pcsupport).
QS_Newton.book Page 60 Friday, December 20, 2002 11:03 AM