Sony VAIO PCG-FR130, Руководство пользователя

Страница: 27 / 150

Using Ethernet and dial-up connections
For setting up local area networks (LANs), Ethernet is a widely installed technology. Your computer accommodates both
10BASE-T and 100BASE-TX Ethernet connections, with data transfer speeds of between 10 and 100 Mbps.
To connect to a local area network using a telephone or Ethernet cable
1. Connect an Ethernet or telephone cable to your computer. See To connect an Ethernet cable and Setting up a
dial-up Internet connection for more information.
Connecting an Ethernet Cable
2.
Click Start , point to All Programs , Accessories , Communications , and click Network Setup Wizard . The
Network Setup Wizard appears.
Network Setup Wizard
3. Click Next . If you are prompted to the Local Information window, follow the on-screen instructions, and then
close the window.
4.
Follow the Network Setup Wizard instructions.
Only connect 10BASE-T and 100BASE-TX cables to the Ethernet port . Do not connect any other type of
network cable or any telephone cable. Connecting cables other than those listed above may result in an electric
current overload and could cause a malfunction, excessive heat, or fire in the port. To connect the unit to the network,
see
Using Ethernet and dial-up connections or contact your network administrator.
Page 27