Sony VAIO PCG-735 Скачать руководство пользователя страница 36

Страница: 36 / 96

Using Your Notebook Computer

Press the Eject button to open the CD-ROM drive.

The CD Tray slides out.

Place the audio CD in the tray and close the tray by gently pushing
the tray.

Press the

Play button on the remote control.

Playback begins.

To stop playback, press the

■

Stop button and press the Eject button on

the CD-ROM drive. Then remove the CD.

✍

See “Controlling Power Management” on page 65 for more information
about System Suspend mode.

To recover from system suspend mode, press any key on the keyboard.

Use only the supplied headphone remote control. You cannot operate this
feature with the remote control supplied with other models.

To remove an audio CD from the CD-ROM drive, remove the CD within one
minute after pressing the

■

Stop button on the remote control. If the CD tray

does not open, press the

■

Stop button and try again.

Your headphone with remote control may look different from the pictures
illustrated on pages 29 and 31.

Содержание VAIO PCG-735

































































































Результаты поиска

Содержание VAIO PCG-735

Отзывы:

Бренды по названию

Популярные бренды

Sony VAIO PCG-735, Руководство пользователя

Результаты поиска

Содержание VAIO PCG-735

Отзывы:

Бренды по названию

Популярные бренды