Sony UWP-V1, Руководство по эксплуатации

Страница: 43 / 72

43 Power Supply
Hand-held microphone (UTX-
H2)
1
Turn the grip in the direction of the
arrow to open the battery
compartment.
2
Align two new LR6 (size AA) alkaline
batteries with the polarity markings
and insert them into the battery
compartment.
3
Turn the grip in the direction opposite
to the arrow in step
1
to close the
battery compartment.
If you open the battery compartment during
signal transmission, the noise may occur.
Be sure to turn the microphone off before
opening the battery compartment.
Plug-on transmitter (UTX-P1)
1
Slide the battery cover to release the
lock and open the battery
compartment.
2
Align two new LR6 (size AA) alkaline
batteries with the polarity markings
and insert them into the battery
compartment, and then close the cover.
Battery indication
When you turn the power on, the battery
condition is shown by the BATT indication
in the display section.
When the indication in column
4 starts to
flash, replace the batteries with new ones.
Be sure to check the expiration date printed
on the new batteries before using them.
Note
BATT
indication Battery status
1 Lights Good
2 Lights Less than 50%
charged