Sony UP-D890, Инструкция по эксплуатации

Страница: 37 / 86

37
Others
For details, refer to the pages indicated in parentheses.
Location and Function of Parts
Front Back
1
Power ON/OFF switch and indicator
Turns the power on. The indicator is lit while
the power is on.
2
RECEIVING indicator
Lights up while the printer is receiving the
data to be printed from a computer.
Turns off when the printer starts printing.
3
PAPER EMPTY indicator
Lights when the printer is out of paper.
Blinks when the thermal head protection
circuit is working against heat build-up.
4
FEED button (30)
Feeds the print paper while being pressed.
5
OPEN/CLOSE button (28)
Opens or closes the door. Also, stops the
printing.
6
Paper cutter
Cuts the print paper.
7
DIP switches (26)
Sets the paper type and other printer modes.
8
Connector (36-pin amphenol) (25)
Connects a computer or other peripherals
using a quasi centronics interface cable.
To use the unit in high-speed transmission
mode (ECP mode), use an interface cable in
conformity to IEEE STD 1284 such as
Hewlett Packard C2951A.
9
AC IN (AC power input) connector (25)
Connect to a wall outlet using the supplied
AC power cord.
ON/ OFF
PAPER EMPTY
FEED OPEN / CLOSE
RECEIVING DIP SW
OFF
ON
AC IN
DIP SW FUNCTION TABLE
NO FUNCTION SW-ON SW-OFF
1
2
3
4
5
6
7
8
PAPER
GAMMA
POSTFEED
COMMAND
RESERVED
RESERVED
TYPE
TYPE TYPE
TONE
TONE TONE
ON OFF
D890 D880