manualshive.com logo in svg

Sony UP-D70, Руководство по обслуживанию

Поделиться
Скачать
Sony UP-D70 Скачать руководство пользователя страница 79

5-11

UP-D70/D70A (UC,CE)

5-3. FMY PRINTING (For UP-D70A only)

Test pattern printing is also performed in ordinary mode by operating front key only.  Color steps

is written in memory by depressing both [STOP] and [MENU] keys simultaneously.  After that,

print is performed by depressing PRINT key.

It is different from test pattern in service mode, print is performed through FMY-15 board.  But,

adjustment of COLOR ADJUST is not reflected.  Be carefull, ribbon remaining quantity is

changed by this printing.

5-4. PRINT CONFIRMATION OF UP-D70

In case UP-D70, since IF-610 board and FMY-15 board are not assembled, built-in test patterns as

described before can not be printed.

But, following patterns can be printed.

1. When P890/891 is attached,

Built-in pattern of P890/891 can be printed by depressing PRINT and STOP keys

simultaneously during READY mode.

2. When P890/891 is not attached, (Only printer)

Gray pattern generated at SY board can be printed.

Print can be performed by depressing PRINT key during ready mode of ADJUST MODE.

Содержание UP-D70































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды