Sony UP-D70 Скачать руководство пользователя страница 46

Страница: 46 / 94

3-10

UP-D70/D70A (UC,CE)

Fig. (10)

15. Delivery paper operation

• Head is separated from platen, pinch roller is separated from capstan, paper delivery pinch

roller is pressed to paper delivery roller.

• Slack of ribbon is taken by ribbon supply motor. After that paper is passed through paper

delivery roller completely by rotating capstan and paper delivery roller.

Fig. (11)

16. Operation after delivery paper

• Paper feed lever is moved to UP, once paper is engaged paper feed roller by rotating paper

feed motor 300 ms correctly. After that, paper feed lever is moved to MIDDLE, and paper

feed motor is rotated 400 ms reversely. Furthermore, paper feed lever is moved to UP, paper

feed motor is rotated 200 ms reversely. This means that papers out of paper feed tray are

returned to the paper feed tray. (This means to prevent slack of rear portion of remaining

paper in the paper feed tray.)

• Paper feed lever is moved to MIDDLE.

• Ribbon is rotated to beginning of next yellow.

• Head and paper feed lever are moved to home position, ribbon cartridge and lock of paper

feed tray is released. The unit becomes on standby mode.

17. All operations are completed.

Содержание UP-D70































































































Результаты поиска

Содержание UP-D70

Отзывы:

Бренды по названию

Популярные бренды

Sony UP-D70, Руководство по обслуживанию

Результаты поиска

Содержание UP-D70

Отзывы:

Бренды по названию

Популярные бренды